Core Characteristics
Independent Height-Leveling Control:
Each side of the axle can be adjusted independently or in unison, ensuring a perfectly level stance even with unevenly distributed weight.
High-Cycle Durability:
Air springs are constructed from advanced rubber compounds and multi-ply fabric for exceptional longevity and resistance to environmental wear.
Precision Ride Management:
Integrates with electronic sensors and valves for dynamic, on-the-fly adjustment between a comfortable cruise and firm, sporty handling.
Enhanced Towing & Hauling Stability:
Dramatically reduces squat, sag, and body roll when carrying heavy loads or towing, maintaining proper vehicle geometry for safer control.
Technical Parameters
|
Parameter Item |
Specification (Single Axle) |
Specification (Tandem Axle) |
Unit |
|
Rated Load |
12-30 |
24-60 |
T |
|
Airbag Working Pressure |
0.6-1.4 |
0.6-1.4 |
MPa |
|
Height Adjustment Range |
90-280 |
90-280 |
mm |
|
Pressure Balancing Response Time |
≤0.3 |
≤0.3 |
s |
|
Rear-End Sway Reduction Rate |
≥60% |
≥65% |
- |
|
Working Temperature Range |
-40 to 130 |
-40 to 130 |
℃ |
|
Corrosion Resistance |
≥1500 Hours (Salt Spray Test) |
≥1500 Hours (Salt Spray Test) |
- |
|
Service Life |
≥1,200,000 |
≥1,000,000 |
km |
Primary Application Scenarios
Personal Vehicles (Sedans, SUVs, Pickups):
For owners who regularly tow boats, campers, or utility trailers and demand a stable, comfortable ride.
Commercial Fleet Vans & Light Trucks:
To maintain performance and safety standards despite daily fluctuations in cargo weight and delivery routes.
Performance & Customized Vehicles:
Enthusiasts use it to fine-tune ride height for aerodynamics or achieve a leveled look when parked.
Specialty Service Vehicles:
Ambulances, mobile workshops, and vehicles with heavy rear-mounted equipment (lifts, generators) require consistent leveling for operational safety.
Services
We offer vehicle-specific fitment kits, professional-grade installation manuals, and direct access to technical experts for configuration support. Our global warranty and dedicated supply chain ensure the availability of upgrade kits, replacement air springs, and control modules.
FAQ
Q: Can this system be installed on any vehicle?
A: While universal kits exist, we strongly recommend vehicle-specific systems for optimal performance, safety, and reliability. Please consult our fitment guide or contact our technical team.
Q: How does it connect and where is the control unit located?
A: Systems can be wired to your vehicle's battery and ignition. The compact control module and air compressor are typically mounted in the trunk, under the chassis, or in an engine bay compartment.
Q: What maintenance is required?
A: Routine maintenance is minimal. We recommend periodic visual inspections of air lines and springs for wear, and checking the air dryer desiccant (if equipped) every few years, depending on climate and usage.
Q: What happens if the air spring gets a puncture?
A: The system includes fail-safe features. In the unlikely event of a puncture, internal mechanical stops or auxiliary springs prevent catastrophic sag, allowing you to drive safely to a repair location.
Hot Tags: rear air suspension, China rear air suspension manufacturers, suppliers, suspension and axle, German style Air Suspension, RV Air Suspension, Air Suspension Front Suspension, air struts, car air suspension
